Pall Acropak 12941 Capsule Filter

PALL ACROPAK 12941

Materials of Construction

• Filter Media: Supor [hydrophilic polyethersulfone (PES)] membrane
• Housing, Vent Plug, and Support Material: Polypropylene
• Sealing Technology: Thermal bonding
• Filling Bell: Polycarbonate

Pore Size

• 0.8/0.2 μm

Effective Filtration Area

• 200 cm2

Dimensions (Nominal)

• Overall Length: 10.5 cm (4.1 in.)
• Housing Diameter With Vent: 6.7 cm (2.6 in.)
• Housing Diameter Without Vent: 5.3 cm (2.1 in.)

Inlet/Outlet Connections

• 6.4 - 12.7 mm (1/4 - 1/2 in.) stepped hose barb with filling bell on outlet

Typical Hold-Up Volume (with 10 psi air purge)

• ≤ 6 mL

Maximum Operating Temperature

• 60 °C (140 °F) at 2.1 bar (210 kPa, 30 psi)

Maximum Operating Pressure

• 4.1 bar (410 kPa, 60 psi) at ambient temperature

Recommended Integrity Test Minimum Bubble Point – Water

• 3.5 bar (350 kPa, 51 psi)

Typical Water Flow Rate (1 cp)

• mL/min at 0.1 bar (10 kPa): 300 mL/min/psi: 207

Bacterial Retention

• Lot samples retain a minimum 107 cfu/cm2 of B. diminuta per modified ASTM F838, current revision

Endotoxin Level

• < 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test

Biological Safety

• Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>

Sterilization

• Sterilized by gamma irradiation and individually packaged (sold as a pack of 3)